Outer Limits 4x4 Board

Hi guys can you please tell me if the TB42 alloy head is the same as a cast head, as I've cracked my cast head and have a spare alloy head?

I've been looking at fitting a holley 350 carb but mounting it sideways for the hills ect. ect.
What do you guys think about that????

Quick question has anyone made the exhuast manifold out of stainless steel instead of using the cast manifold???

Worked out the problem was with the magnetic pickup, they left one magnet out so it thought i had a 5cyl engine,,,bloody Yanks lol

Cheers Chris

ive worked out something it's not firing number 4 cyl as the exhuast was colder on that pot, so them tested the lead and no spark, so got another lead and again no spark out of number 4 out of the cap.....struggling here need a fix as going away for chrissy

Cheers Chris

l just fitted my unit and had to file back the collet at the top and after install the tacho jumps around and has a miss when free reving it,,,,,,,changed coils cause i have an efi coil and it is a 3ohm coil and i still have the same problem and mine is doing it on gas and petrol but to me its an ...

Thanks for the reply's guys....

So do i take as no reply that no-one has done this....

Cheers Chris

Hi guys trying to wire up a electronic distributor of a Tb42e onto my Tb42 but don't have the original plug, so not sure on how to wire up, any help will be appreciated.

Cheers chris

Jimbo wrote:I paid $150 for it.

No intake temps as there isnt a sensor for that

thanks mate l will look into it.....

Cheers Chris

Dont buy Terrain Tamer seals they are crap....we bought 4 kits and all 4 kits put in the same weekend and they all still leak throu the seals....

Cheers Chris

Dont buy Terrain Tamer seals they are crap....we bought 4 kits and all 4 kits put in the same weekend and they all still leak throu the seals....

Cheers Chris

Dont buy Terrain Tamer seals they are crap....we bought 4 kits and all 4 kits put in the same weekend and they all still leak throu the seals....

Cheers Chris

Hey Jimbo what did it set you back....

Also does it show you intake manifold temps..


Cheers Chris

Thanks guys turned out to be the master cylinder all good now.
Cheers Chris

Hi guys my mate is having a problem with his clutch on his GU.
The pedal is stuck to the floor and won't come up unless you pull it up by hand, he has tried to bleed the clutch but it won't take the fluid, also blew the clutch line out with air.

Not sure what to try next we replaced slave cylinder ...

hahahaha ebay scores mean nothing, just means that 5000 people have a HID setup that has warranty that cannot be backed up and may fail 1 week after they posted that ebay feedback. Support local, they have put in the effort to give you a product that they will back up

Well l buy mine from China ...

Whats your budget.
there was a thread here from assassin offroad ages ago for some massive discs and calipers all round.. cost was round $6000 from memory, was round 2-3yrs ago


Geez where they racing around Bathurst in the Patrol to warrent paying $6000 for brakes, it's a 4X4 for Farkkes sake ...

Cheers Guys,,,

does anybody now anyone in the Nth Subs of Melb or near abouts...

Also it's Petrol/Gas.

Thanks again Chris

Hi guys wanting to know where to take the 4by for a dyno tune as l have had the gas re done and thinking it needs a tune...

Cheers could you include approx price...Chris

lf you haven't tried to drive it with the clutch slipping full on pull the rubber boot off and stick the hose in a little bit, turn the hose on and start the car and push the clutch in and out until clear water comes out.....and try that it should come good....

lt should last a couple more months ...

aarrrgggghhhh!!!!!! MY GQ has just gone up in value once this ugly thing hits the market....

X3 HPR 30 magnatech is crap when it gets hot goes to water which = no oil pressure...

Cheers Chris

Thanks for your replies but l bought a 20% stronger than standard clutch for $316...

Cheers Chris

So does the deisel clutch fit the tb42e motor as l read it has a bit more clamping force,,,as l am changing my clutch over the long weekend (spewin can't go away) so any advise is appreciated.

Cheers Chirs

All dixed and now have duel fuel again.....pump cost me $180 from bursons...

Cheers Chris

Thanks for that.

Whats the average price for a fuel pump was quoted near $400..

Hi guys has anyone used a different fuel pump in there petrol tank other than the factory one. And also does anyone know what fuel pressure it's suppose to be.

Cheers Chris

BUMP!!!!!!!

Just completed my custom snorkel yesterday.
Cost me around $230 all up later add $50 for a stainless 45 bend insted of rubber and you still come under $300....

Pretty big saving also can get a full pipe with welded bends in stainless for about $280 then you fit the rest...ie rubber 90 into the ...