Outer Limits 4x4 Board

Hi Folks

Looking at replacing your worn out 80 Series Steering Wheel ?

Not many options out there except aftermarket stuff that's either too small or too ugly.

My solution was a New Hilux Wheel.

I wanted a Factory look aswell as a wheel with the same diameter 380mm approx.

So does it fit ...

Go here for all 4x4 switches
http://www.customrockers.com.au" onclick="window.open(this.href);return false;

Im currently building a 8 x 5 off roader.

I chose Zincaneal.

Welds very well.

TO ANSWER EVERYONES QUESTIONS..

The ones I sell on EBAY are that price for several reasons.

1.To cover costs that are incurred by using Ebay. Soon to stop.

2.To re-coup the cost of the machine that prints them...$$Mega Dollars$$

3.To slow the demand down as they sell faster than I can print them ...

Ok you caught me..Its me.

Im selling these on ebay for now, but soon I will have an online shop.
These switches are exactly the same as the ones you would buy from ARB.
No their not cheap chinese ones either, these are genuine carling.

1. No You wont buy them from ARB.
2. No You wont get them from ...

Look Good Dont they?

http://i275.photobucket.com/albums/jj289/crozza/WinchPower.jpg
[/img] http://i275.photobucket.com/albums/jj289/crozza/bunnyburners.jpg
http://i275.photobucket.com/albums/jj289/crozza/fridgepower-1.jpg
http://i275.photobucket.com/albums/jj289/crozza/utetraylights.jpg ...

You mean, Like These

http://i275.photobucket.com/albums/jj289/crozza/spotlights.jpg
[/img] http://i275.photobucket.com/albums/jj289/crozza/bulllights.jpg
http://i275.photobucket.com/albums/jj289/crozza/worklights.jpg
[/img] http://i275.photobucket.com/albums/jj289/crozza/roofblue.jpg
http ...

answer
remove the screw then slide the whole unit forward and then it will pry off

GIDDYUP !!!

Same place you get these...

http://i275.photobucket.com/albums/jj289/crozza/roofblue.jpg

[/img] http://i275.photobucket.com/albums/jj289/crozza/bulllights.jpg

http://i275.photobucket.com/albums/jj289/crozza/spotlights.jpg

[/img] http://i275.photobucket.com/albums/jj289/crozza/worklights.jpg

My unit was 12mnths old..
When i took it to Uniden that is exactlly what the man said about them blowing up..I imagine its a surge of some sort that pops them.
He told me to fix it was a waste of time.
Im an engineer, electric /electronic / electromechanical... and have been for 25 yrs..when people ...

You need one of these..

If its a uniden...take it back..

They usually blow the mofsets inside. Its caused from jump starting youre car or shorting the unit during install...
Mine did the same thing..useless beyond 20 ft.
Recieves ok but wont transmit. Took it to uniden and the guy told me that this is a common problem ...

Whem I first did my trims, I too used a foam that was too thick.
I found getting the handles on difficult but they grabbed eventually, but the problem was the circlip caught on the foam and ripped a chunk of it off
causing a pit under the foam. Second problem was the winders wore a mark on the vinyl ...

There is a small chrome/silver c-clip that holds the winder on. You need to flick it off with a tiny screwdriver. You will have to push the door card/trim inward a little so you can see the clip between the winder and door trim. Or Go electric.



http://www.outerlimits4x4.com/ftopic167923.php ...

GO HERE

http://www.outerlimits4x4.com/ftopic167 ... highlight=

I do believe I mentioned this would happen during this thread....
Oh well......

Well that is a pain in the ass.
Dont quote me on this, but I think the front ones under grill assy are 250mm long. body ones were 200mm.

I suggest you buy 300mm ones and cut off the excess after or before fitting them. They will be super expensive, but at least they will all be long enough.

http ...

Pull one out now...measure it and add 50mm to the length and you got youre answer.
Take one from the rear of cab and one from front of cab and one from the front grill assy.Measure these.

Thats what I did to mine and presto!!!!!!

If youre going to put VZ seats in a troopy, I can assure you that youre comfort level is going to go through the roof. Couldnt think of anything better other than 1200 dollar seats of some sort.

That aint rust......Thats cancer.
You wont stop that comming back...

VOMIT........

Only problem with the styleside is the wheel arches. Not real good for my purpose.
Carrying alot of gear and sleeping in the back is a pain in the arse. The tray back is the best option. As for the longer trips this is something I plan on doing more of.

Cutting, chopping, welding, fixing, making ,bending, brakeing, All up my Alley...
No problems there.

OUCH

maybe get the 1hz version and turbo it the same as I did with the ute.

15/100 aint that bad.
My dunnydore I use during the day chomps down 12.
Dont do a lot of Km's in the 75. Its done 8000 kms in 5 years, so fuel consumption doesnt bother me.

The only places I tend to go to when 4wd arnt to far away from here.
Takes 15 mins to hit the bush in any direction from ...

Very True

But I can get one of these 105's for as little as 16k.
Wont get a 79 for that, maybe a wreck.

The 105 come with a bucket load of extras compared to the 79.
And I do love the 79ers.

Sell This

http://i275.photobucket.com/albums/jj289/crozza/hzj.jpg


Buy This


http://i275.photobucket.com/albums/jj289/crozza/stock.jpg
[/img]


Do this

http://i275.photobucket.com/albums/jj289/crozza/Chopped105.jpg



Going to sell my beloved 75 and buy a 105 and chop it.

A little ...

GO here
http://www.outerlimits4x4.com/ftopic178897.php

or here

http://www.outerlimits4x4.com/ftopic155267-60.php

This is probably the best option.

Best advise I can give you is fit one from a 79 series ute.

This is what I did. Its exactly the same seat and rails as the older 75 series, but is a much more comfortable seat compared to an old worn out 75er.

Mine is from a hzj79, but it is still vinyl, but thats ok. If you want one with cloth ...