Outer Limits 4x4 Board

all shifters are in the one spot, no need to cut another hole in the tunnel



(In my case however, I still had to as I changed from a forward shift to top shift, so blanking front hole required + I wanted to retain my console)

You should look at triple sticks from RADesign if you haven't got your twin sticks yet

Bogan & Me got 33rd, pretty happy considering we only got it out of the shed on thursday, then straight onto the trailer friday morning.

my bros 08 has this aswell, looks awful. he just put a dash mat on it.

spend 50k+ on a car and have this happen with in a few years is sh!te. its not as bad as the factory gps screen though, what a piece of crap that is

what a great weekend. thanks to Tony & the club, I've being to every toperi so far and they just keep getting better.


pretty happy with 14th, The big patrol struggled with the usual breakages , sounds like Bogan is getting that sorted for good :armsup: so thanks to Jase & Dan for holding us up ...

where abouts is vmc?

91Mav wrote:Hey mate, the knuckles are the same, therefore interchangeable. I'm pretty sure that you can't get six shooters for right hand drive vehicles though.

Trail-gear now sell six shooters for RHD vehicles, they have had them for a couple of months now

suprising to see that surf cluster in MPH

You can use the lexus auto and the surf rear auto housing with the chain to gear drive adaptor. You just need to swap or shorten the output shaft. Pic courtesy of Boof

http://i11.photobucket.com/albums/a181/mg_ellis1/6th%20Gen%20build/100_0602res.jpg

When I rang Locktup, as soon as I mentioned ...

I wonder if someone has an interest in Performance Metals Australia? and all these people will be needing to re-bend their cages, where do you get a JD from?

Maybe they should ban any other tyre but Interco as well?

Money must be getting tight :P

I thought it was quiet interesting at ...

I don't know alot about the lt230s, would it be easier to swap out to a 4.56 ratios?

Pm evanstaniland he had one behind his 1uz with 80diffs, should be able to help.

Had a good look over these at the show on the w/e. I got the hots on these rangers with a bit of kit, they are definately bigger then the VW. Planning to get something newer/tow rig in 6-12mths and I love the hilux but it is failing in the power dept. & also lacks towing ability. LC200 woulda be the ...

80 cars is awesome. Really disappointed I can't make this, my father is coming from interstate that w/e to meet the new grandchild, bugger!
what were you going to drive? the subaru outback haha :finger:

Early I was hoping the truck would be finished but I'd still get along. Had a great time with ...

80 cars is awesome. Really disappointed I can't make this, my father is coming from interstate that w/e to meet the new grandchild, bugger!

rusted welsh plug? does it have coolant in it or just water?

SierraDan wrote:Nothing from Snake Racing worth the money.

Toyota Celsior runs a rear sump

Sounds good hope I'm not working that weekend

Tony guy is really good, may be a bit far from CC, depends how far you want to go

+1 vote

yep its 170mm extra including adaptor

supazuk wrote:

Jcas24 wrote:Lux diffs under the vit

vitaras are wider then a hilux.

yeah thats all they have over lux diffs, nothing offset and spacers can't fix

Lux diffs under the vit

Factory height progressive 80 series coils from dobinsons gave a neat 4" (and coped better with the extra weight of the rear bar and spare tyre)

Is that what you settled on in the runner Twisty?
I heard progressive will give you comfy ride but hamper flex. Yours seemed to flex well in the rear.

yeah I would just swap the centres over and then rebuild the front when funds permit

nice truck mate, sounds like a good score.

I have gotten heaps of stuff from Lowrange, they are great to deal with. I considered there dual case x member but once we decided to lift the cases it wouldnt suit. And its also cheaper if you can or have a mate with fab skills

well I have done both (low profile x member & body/engine/trans lift) and gained around 4.5inches. we were going for a flat belly but I would have to cut too much of my floor out to lift the cases any higher.

You can just go with the low profile x member if you dont wanna do all the other work, its ...

you can gain about 50mm of clearance if you make a custom cross member.

yeah Vigo is wat they call it in asian countries (and a few others I suppose)

has anyone seen these yet??
What do you think?

http://www.carshowroom.com.au/newcars/news/2224/_New_Toyota_HiLux_Extra_Features_and_Better_Value_

the new front end is a bit ugly, hopefully ab arb bar can make it look a bit better ( I remember thinking how ugly the new hilux was when it first ...

I got the top shift conversion kit B and it worked a treat, however the block off plate didnt fit the bolt pattern for the front hole.

I think I have a top shifter & base laying around, I'll try and dig it out if your after one