Outer Limits 4x4 Board

Matey im not going to even bother reading your reply,... clearly yout blinded by the asshat your wearing...

Do you often publically embarrass yourself by showing your ignorance?

This has clearly become a discussion for wingers, back to the point.

TUFF TRUCK 2011 was awesome! Great Trucks ...

@ ice

I have edited my initial comment, after reading it looked like I was having a dig at peter for wrecking the event. This is not the case at all, I think it was excellent, but I must ask myself, what is the difference from past tuff truck events from the beginning to now, a period of 8 or 9 years, are ...

That was good but I think team powerful's back flip at speed with navi still in his seat was the crazy ride of the weekend.

I think the powerful guy should not be welcome next year. They are dangerous and a huge risk to the spectators.

I think maybe people who are not smart enought to think ...

lookin into getting some 35 radial treps, just wondering how you rate them in mud, rocks and sand?

cheers in advance.

Hi i was wondering if anyone had some specs on cutting part of the rear wheel arch out of a gq lwb so 35's wont scrub. i already have cut 1/4's and a 5in coil lift. currently has 2in blocks, but there coming out..

i remember seeing a thread about it a few yrs back but can't find it.

cheers,
Tyler ...

hey everyone, just an update, with the new adrad manual radiator (500), pwr oil cooler (150), new hoses (35), temp sender (12), and au thermos (100) it seems to be behaving!!! around town sits 2mm below half, on motorway gets to between half and 2mm above, then under massive load going up razorback ...

Thanks for the advice everyone, i have removed my viscous fan and shroud, and fitted AU thermo's, i wired the A/C helper thermo to a relay with ign switching, and used the signal that is from the ecu for the cut in on the AC helper fan to trigger 2 relays that drive each of the AU thermos, i then ...

hi, i have a gq with a tb42e in it and auto, when under load gets bloody hot, ie big hills, up the beach in sand etc. it is body blocked, however mates who have the same combo dont have heating problems...

i have so far replaced the thermostat, waterpump and spent 3 hrs cleaning the radiator inside ...

hey mate, this thing is starting to look pretty serious haha, was having a chat to ya while you were at dps the other day. see ya at pc.

slu73 wrote:diesel power systems ...................

buy far the best place for tune's ,
they are in kawana on the sunny coast

2nd that!

pretty sure a 600 edelbrock is a tad too big for a 4.2

oh cool, thats what i needed to know!

cheers !

g'day, ive got an auto behind my injected 4.2, ive just noticed that when i am cruising along in drive with OD off, at about 50km, if i accelerate to the point of the switch at the acc pedal 'clicks' to tell it to drop back to 1st or whatever, the power light on my dash switch comes on (in most ...

its a 1990 mavrick tb42

Hi everyone,

i have a 5 inch coil lift and 1 inch spacers in the front of my wags, i am running the offest bushes, and it sux, especially when the roads are wet!

i have acquired some 5deg plates, so was going to ditch my offset bushes and put in gu slotted ones to get better drivability and flex ...

return and feed fuel lines correct?

Hi, was just wondering who out there is running polyurethane bushes in their panhard rods, and what sort of life you get out of them ??

i have a 5 inch lift, and got about 5 months out of my 1st run of panhard bushes, they started to crack and get a fair bit of play, so i got a new front n rear set ...

they cost about $ 65, i got mine from car bitz for $ 85.. a mate worked there but you could say you were quoted that somewhere else?

i put in a 5 inch efs lift, i needed to chop the hell out of my tank, and i used the std upper trailing arm, was a bit sceptical about the bent ones you can buy.. i.e. strength and the possibility of incorrect distances of the bushes to match the std one on the other side.

i ended up welding in ...

striga22 wrote:cool do you know how much roughly? cheers

I'll second that??

Hi all, i have an aftermarket adjustable drag link in the wags, it has been there for about 6 months, and both the ball joints (non greasable) have flogged out, i got a wheel alignment about 2 months ago and they were fine then...

because i have a 5 inch coil lift with a 1 inch spacer in the front ...

we had a great weekend, however the bloke that was clearly learning how to drive the scissor lift in the process of putting up bbm signs at mudrats on fri night frustrated the hell out of me... im not sure wether it was a last minute thought, but to me it seemed that the stage could not get underway ...

hey guys, cheerz for the help, i got 12.5 mm wide x 150mm long HT, with nyloc nuts and 20 washers, no dramas! ;-)

hi, i am about to replace my body mount bolts, when i bought the car it came with the body blocks in it already, but it seems that the bolts used are as dodgy as they come, there have been 3 or 4 nuts that are larger than the bolt thread stacked ontop of each other acting as spacers so the bolt can ...