Outer Limits 4x4 Board

can you put up some photos
is it a profesional or a back yard conversion
has the radiator been modified
what radiator has been used

I get my gear direct from Foothill offroad in California
Try this on ebay
Trail Gear Toyota High Steer Kit RIGHT HAND DRIVE Item number: 140312513695
www.foothilloffroad.com

hey all..

need some info to these questions abt my truck...or know of any good site fer me to read up? the truck didnt came with a manual when i bought it, so i been reading thru the hilux/4runner repair manual book... a lil bit overloaded with info...... anyway....


1. what brand of diff and ...

This is R151 with my cut and welded housing to fit a geardrive transfercase
http://i262.photobucket.com/albums/ii84 ... arbox1.jpg

how much are these R150 worth and wheres the best plase to get one from please guys

BTW does this one look like the R150 box?

http://i166.photobucket.com/albums/u95/megabuff_photos/sideview2.jpg

http://i166.photobucket.com/albums/u95/megabuff_photos/sideview.jpg
[/img]

That looks like a ...

Pics hope it helps man.
Foward shift
http://i152.photobucket.com/albums/s162/SIC_LUX/Tech%20pics/forwardshift.jpg
Top shift
http://i152.photobucket.com/albums/s162/SIC_LUX/Tech%20pics/topshift.jpg

I'm assuming the top pic is R and bottom is G?

Do you have pics to show the difference in R and ...

My speedo and tacho are not working in my 4runner. Mechanic reckons its a prob behind the dash face. Question is, how the #^&@ do I get the dash face out? Its an 89 mod. All I can see is two screw holes above the clear plastic face and thats all. Do I have to remove the whole surround that goes ...

x2 the master cylinder

R15# is 23 spline
G52 with geardrive transfer is 21 spline
G52 with chaindrive transfer is 26 spline
I have grafted the R151 housing onto the G52 housing and made a 23/21 spline couplers
I am wanting to cast some housings now

They will fit

Luxo wrote:Hey guys I was wondering if someone could post up the centre pin diameter for the front leaf springs of a LN106 Hilux. We are looking at making some lift blocks.

The pin through the leaves is 10mm
the head of the pin is 14mm

I have a drama with a mates hilux we've changed the box in the lux ln106 it runs a v6 vn motor we changed the gearbox from the diesel box to a petrol gearbox and now the speedo is 15km/h out just wondering if any one no's how to correct the problem

Are we talking G52
petrol and diesel are both ...

What is the oil level ? how old is the oil?
Check the pivot sockets at the bottem of the gear lever, the bush might be warn and not letting it fully selecting gear
Change the oil
If it is howling it could need reconditioning
The G52 does not generaly have a problem if driven normaly

If you must use a whautomatic use the VN/P T700 not a 4L60E
also use the VP engine harness and computor
I use this all the time including on supercharged L67 conversions
There are a lot of woodies that regulaly tell me it wont work but wont pay up when they have lost a bet
If you use the the ecotec ...

Hey guys, I have aquired a 80 series Hi pinion front diff centre and want to put it into my 92 solid axle hilux, are they a straight swap over and will I be able to use my lockrite locker.
Also are the 80 series rears a Hi Pinion as well and can the same be done??

The hi pinion is a straight ...

I need to know if a V6 1995 4Runner fuel tank (EFI engine so it has the swirl tank built in) will fit in the same posi as the standard tank in a 1990 22R 4Runner?
I need an EFI tank for a Holden V6 transplant.

Yes it will fit but check your tank first because I have found the swirl pot in some ...

I use the standard Hilux diesel ln106 radiator with a 11 blade viscous hub engine driven fan
It is great in W.A.s 40 plus temperatures

http://img.photobucket.com/albums/v167/ ... e/fan2.jpg

http://img.photobucket.com/albums/v167/ ... 0_9972.jpg

I have been drilling the flanges to take both early and late tailshafts on Hilux diffs for years
It sounds like you have a 5.29 diff out of a 70s Hiace van with 8mm holes
clock the tailshaft and drill 10.5 mm between the existing holes

http://motors.search.ebay.com/search/search.dll?sofocus=bs&sbrftog=1&dfsp=1&catref=C6&from=R10&mppfqy=toyota&satitle=toyota+4.56&sacat=-1%26catref%3DC6&fmmk=&fmmd=&fylo=&fyhi=&mppfqy=toyota&sadis=200&fpos=ZIP%2FPostal&sabfmts=1&saobfmts=insif&ftrt=1&ftrv=1&saprclo=&saprchi=&seller=1&sass ...

Brainless wrote:Hi,

I currently have a YN67 Hilux with a 4Y-C Engine and am wondering what Diff ratio you would recommend for use with 35inch Tyres

You already have 4.875 diff ratio
I am thinking 5.28 ratio with 35s

If they are both 'G' code diffs [8" crown wheel, about 20 cm] they should interchange

All G52 gearboxes upto 97 I think [some one will correct me if I am wrong]
Bell housing is changeable
geardrive transfer case model has 21 spline output
chaindrive transfer case model has 26 spline output

If you take the BCM out you cant get any fault codes for diagnosing problems and the OBD scanner will not work
I use the VP harness and computor on all ecotec conversions including the Commodore V6 Supercharged engines

The reason is for the ease of instalation, cost and repair
As to the fan I use ...

ok ladies and gents, i am after personal experience on this one.

has anyone used a kit from v6 conversion specialist? as i have the box and motor lined up for it, but am needing engine mounts and transfer case adaptor and such. been looking around and this seems like it comes with everything ...

I have them on my 4runner and they give about 2" lift straight up
The travel of the spring is limited by the shockies and you should put longer hoses on or relocate the front hose bracket onto the side of the chassis rail pointing down this way you can use standard hoses

Try Foothill off road, I find them great to deal with and have been using them for a while and they ship via usps
I have duals and cross over steering from them

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=003&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=130089154085&rd=1

Adrian

When I make hoses for commodore series 2 to hilux the hose is about 290 mm long with right angle fittings and nipples in the P/S pump and steering box

Toyota makes 15 G code diff ratios for arround the world
From 3.07 through to 6.8
6.8 was used in the Toyota 25 made in the early 60s

Try Eagle Auto spares they import those engines
They have branches in NSW and VIC

The 5L 3 litre engine has the G52
The 1KZ turbo 3 liter has the R15# gearbox