Outer Limits 4x4 Board

You should know Dave by now if you say you dont like it he will make sure it's in there

Hey Dave
will there be a ground anchor stage just need to know if we need to fab up brackets before the weekend, any water stages :bad-words: :bad-words: for the friday night if there are remember the muddy cuddle :roll: I gave you this time it will be a really wet one you have been warned ...

will be there with Doof Doff as usuall got doors now no more climbing out the window getting to old for that

cool Dave the old 80 is looking like a new clutch might be needed in the not to distant future

not sure if it would work with a 60 series from what i have been told it is because the hid lights have such a low current draw it wont activate so the module creats a load on the system and then alows everything to go back to normal would sugest you check out their ebay site and send them a message ...

I had the same problem when i fitted hid kits to the HI?LO and Hi beam no spot light working and no light on the dsah when hibeam on, found a load module on ebay freom a company called NEWPRO_TECH in NSW its called a H$-Bi Xenon HID load module in you put in H4 HID Conversion kits they usually come ...

I had the same problem when i fitted hid kits to the HI?LO and Hi beam no spot light working and no light on the dsah when hibeam on, found a load module on ebay freom a company called NEWPRO_TECH in NSW its called a H$-Bi Xenon HID load module in you put in H4 HID Conversion kits they usually come ...

Good to see you back Duncan
chris and chris will be there with the new buggy had my first look at the new hydrolic winch today very fast should be interesting hey Dave we worked out a way to mount the ground anchour so no penalty for us for not having it onboard now woho gota love not getting ...

Easy Chris we just put chris on both doors again and either of us can drive whoo hoo sorted

gate ? what gate ? oh!!!!! that gate

Hey Dave

hows the set up going, is there a list of competitors yet
cheers
chris

onther option is to try and get a bolt with a 1/2 inch socket recesed into like dare i say it (nissans) have then all you need to do is clean the mud out and use a standard 1/2 inch breaker bar or ratchet

Thanks guys yep mines late 94 4.5 petrol with 16 inch rims, kit came with the spacers to go on the end of the cv will chase down some factory ones second hand

put in a part time kit in my 80 gxl and it came with avm hubs what to use factory toyota ones instead, a solid axle hi lux will fit but wondering if early ifs will be the same or from a 75 ute will fit.
thanks guys
chris

Hi Brendan
what time do competitors need to be there for on friday night for the night stage just need to know so i can get away from work in time will you have copies of the rules available on friday
cheers chris

Hi Brendan
is there a camping area set aside for competitors or do we need to book a spot?
Cheers Chris

Hi Sterlo & Jo
looks like young Daves getting cumffy in the truck so if you need a hand I will be up Friday with Karren so put me down to help out.

Cheers Chris Brame

if you have a constant front end you will need the double cardin i had to put one in mine when i put 6 inch in mine, cost is a round $750 from driveline services I have one available for $500 if you need it

Concrats Jacko and Griffo on the win top effort from Brian and his young fella Dave I think dave was the yonugest competitor still doesnt have a liscence, My mate Wil you nust be happy made the top 10 we missed out by one spot last year so concrats mate 3rd for Ian a top effort as well, to all the ...

we did the cutting of the breather as a short team thing, i should have completed my run down when we got back we ran a catch can from the hose from the rocker box and put a breather on it and left the hose going into the turbo blocked off you just have to check the catch can now and again thats all

Hi Paul
we have had this happen on our winch comp truck
what we did is cut the breather hose from the top of the rocker box and where it goes into the turbo and block both ends, this is beacause when on extreme up hill climps the oil flows to the back of the motor and fills up the back of the rocker ...

Hi Amber is SSS still on with this bad weather? do we need to bring our water wings up ?
Cheers Chris

Hey Sterlo ; Wil Neilson's Navi will be Chris Brame

Hey Steve ,
Chris here Wil N's Navi thanks for that, yep the gauges still work every thing seems to be working ok have tried disconecting the battery and it's still the same, might have to check the sender units and level units just got to find them, got a manual so I'll give it a go, if I get stuck ...

Hi Guys
Just bought the wife a 97 prado RV 2.7 petrol and have a problem with the sub tank. when I hit the swith to turn on the sub tank the light on the sub gauge comes on then after a few seconds it starts to flash, the manual says to contact toyota possible fault, just wondering if anyone esle ...

Glen's been working out so Wil wont have to adjust my harness to fit him, I've been laid up all week with a virus and Glen kindly stepped in for me, hopping to get up at least for a day to cheer the boys on. Glen only one surgestion if there are trees in front close your eyes! Wil just goes though ...

Chris from Car 17 The LowRangers hear
Thanks to Rudi and Hobzie for a great event, this was the first time for this event for both of us and Big Wil and myself teaming up and we had a ball, considering Wil had ony drove the new truck for about 3 hours prior to Cliffhanger he drove like the devil ...

Big Wil and Chris are putting the final touchs to the new truck tonight, couple of dramas today with a faulty thermostat but now all fixed, packing and leaving with Brian and Sheety in the morning, their following us down, hopefully we can stay in front of them thoughout the week, Wil's had the ...

Hey Rudi or Hobsie will there be EFTPOS available out at the camp site or are you shouting all the teams free drinks?

Hi Troy
I had the same problem with my high mount bar with hella 4000's what I did is cut a section of 25mm box section, cut it on a 45degree at both ends then you can drill a hole in the bottom and one in the top at opposite ends this allows you to bolt onto the existing bar tabs with the top hole ...